Advanced Technology Consultants
A Superior Source of Knowledge

In-house Professional Training on Automotive & Aerospace Topics               New Product Evaluation on its Criticality Within the Technology Sector, Competitiveness, & Market Demand               Business Analysis for Investment Purposes               Comprehensive Evaluation of Corporate R&D  for Effectiveness, Innovative Performance/Attributes, and Future Success               Training on Management of R&D               Technology Roadmapping              Integrated  R&D and Corporate Strategic Planning               Comprehensive Evaluation of the Disruptiveness Potential of New Technologies               Benchmarking Corporate Board of Directors               Combustion &  Emission of Pollutants               Consulting on Advanced Technologies               Nanotechnology and Applications in Fuels & Propellants                Ignition Technologies for Engines               Gas Turbine Combustion and Emission of Pollutants               Liquid Atomization & Fuel Injection               Management of Innovation               Expert Witness in Legal Matters              Feasibility and  Economic Analysis               Propulsion Systems Design               Systems Engineering in Design & Project Management               Technical and Fundamental Analysis of Financial Market               Composite Materials, FRP, and Pressurized Composite Gaseous Fuel Storage             Car Accident Reconstruction               home | help | email

Why ATC?
Service Areas
ATC Images

Welcome to


Advanced Technology Consultants

Laguna Niguel, California
USA    92677
Tel: 949 467 9233
(001 prefix outside USA)

Lugano, Ticino
Switzerland 6900



Liquid Rocket Engine


Advanced Technology Consultants has been involved in propellant injection issues pertaining to liquid rocket engines for over 15 years. One of the areas of expertise in which ATC has achieved  world-class performance and prominence is the understanding of the injection under supercritical condition similar to what occurs in (liquid) hydrogen/oxygen cryogenic liquid  rocket engines such as space shuttle main engine (SSME). 


Dr. Chehroudi's work on supercritical injection, conducted at Air Force Research Laboratory (AFRL) and in the context of liquid rocket engines, is globally recognized as original and pioneering. He started his R&D work on high Reynolds number  injection of jets in 1998, at a time when no model for such cases existed, and in general not much quantitative information was available, for use in a systematic computational simulation.  His leadership in this area culminated to  a ground-breaking finding, which quantitatively proved that supercritical jets, for the most part, appeared like incompressible variable-density jets.  Application of Fractal Analysis to the supercritical jets was considered for the first time. The fractal dimension measurements for the boundary of such jets supported  the notion that such jets appear as incompressible variable-density jets.  He also conducted modeling efforts on supercritical jets resulting to the only validated model in the literature. For example, for the first time, a successful model for the growth of the mixing layer in coaxial injectors under supercritical  condition was proposed by Chehroudi which is currently the only reliable one being used  by design engineers and modelers.


NOTE: Contact Advanced Technology Consultants for consulting needs and opportunities in this area.




The following technical review article appeared as an invited paper in an special volume of the Combustion Science and Technology Journal dedicated to supercritical fluids and their applications. For a list of this and other papers click here: CST Journal.


Injection of Fluids into Supercritical Environments

Chehroudi et al.

An Invited Contribution to An Special Volume of the Combustion Science and Technology Dedicated to Supercritical Fluids
Volume 178, Numbers 1-3, Number 1-3/January 2006, pp. 49-100(52))



This paper summarizes and compares the results of systematic research programs at two independent laboratories regarding the injection of cryogenic liquids at subcritical and supercritical pressures, with application to liquid rocket engines. Both single jets and coaxial jets have been studied. Cold flow studies provided valuable information without introducing the complexities of combustion. Initial studies utilized a single jet of cryogenic nitrogen injected into a quiescent room temperature nitrogen environment with pressures below and above the thermodynamic critical pressure of the nitrogen. Later, the work was extended to investigate the effects of a co-flowing gas. Parallel to this work, combustion studies with cryogenic propellants were introduced to understand high pressure coaxial injection phenomena with the influence of chemical reaction. Shadowgraphy and spontaneous Raman scattering were used to measure quantities such as growth rates, core lengths, turbulent length scales, fractal dimensions, and jet breakup regimes. It is found that jets injected at supercritical pressures do not atomize as they do at subcritical pressures. Rather, they behave in many respects like variable density turbulent gas jets.

Table of Contents

1 Introduction 
    1.1 High pressure combustion in liquid rocket engines 
    1.2 Thermo-physical properties and issues specific to supercritical conditions 

2 Test Benches and Experimental Set-ups 
    2.1 AFRL test bench 
    2.2 DLR cryo-injector test facility 
    2.3 DLR high pressure combustion test facility P8
    2.4 Diagnostic methods
         2.4.1 Shadowgraphy 
         2.4.2 Raman scattering 

3 Single Jet Investigations 
    3.1 Jet surface
        3.1.1 Phenomenology at trans- and supercritical pressure
        3.1.2 Length scale analysis 
        3.1.3 Fractal analysis 
    3.2 Jet decay
        3.2.1 Visualization of jet core length
        3.2.2 Center line density decay
        3.2.3 Jet spreading angles
        3.2.4 Jet disintegration under the influence of an external acoustic field
    3.3 Modeling ans simulation single jet injection at high pressure 
        3.3.1 Phenomenological model of the jet growth rate 
        3.3.2 Numerical simulation of injection at supercritical pressure

4 Coaxial Jet Investigations
    4.1 Non-reactive coaxial jet atomization 
        4.1.1 Visualization of coaxial LN2/He-injection
        4.1.2 Density measurements in a coaxial LN2/GH2-jet 
        4.1.3 Coaxial LN2/GN2-injection under the influence of an external acoustic field 
    4.2 Hot fire tests: LOX/GH2-injection

5 Summary and Conclusions 6 Acknowledgements 


Back to Top of This Page

NOTE: Contact Advanced Technology Consultants for consulting needs and opportunities in this area.

Copyright 2017 - Advanced Technology Consultants- All Rights Reserved

  ** HOMEPAGE ** Why ATC? Technology Service Areas Products/Services Clients News Personnel Contact ATC Images